Process and Equipment for Advanced Thermal Barrier Coating Systems

Bond Coat Cavitation under CMAS-Infiltrated TBCs

Assessing the Delamination Behavior of CMAS Infiltrated TBCs under a Thermal Gradient

CMAS infiltration of YSZ thermal barrier coatings and potential protection measures

Overview of Environmental Barrier Coatings for Ceramic Matrix Composites

Progress In Depositing Solution Precursor Plasma Spray Thermal Barrier Coatings

Thermoelastic characteristics in thermal barrier coatings with graded layer between the top and bond coats

Stability of Silicates for Environmental Barrier Coatings

Epitaxial growth of sputtered TiO₂ films on α-Al₂O₃

Cu-dependent thermal transformations in hard Al-Cu-O coatings

Multicomponent nanostructured coatings with high thermal stability, corrosion-, oxidation resistance, and improved lubrication

Influence of residual stresses on the spinodal decomposition of metastable Ti_1-xAl_xN coatings

In-situ small angle X-ray scattering and phase field study on the microstructural evolution at isothermal annealing of TiAlN thin films

Towards an Improved Stylus Geometry for the Scratch Test and Superficial Rockwell Hardness

Surface Characterization of Optimized TiSiN Coating Deposited Via A Combination of DC and RF Magnetron Sputtering

Surface Analysis of TiAlON and CrAlN Coatings Deposited by Means of HPPMS

Nanoprobe measurements of anisotropy in thin-film nanocrystalline coatings

TaSiN Thin Films: Si Influence on the Optical and Electrical Properties

The effect of nitrogen content on stability and elastic properties of TiAlN studied by ab initio calculations and combinatorial reactive magnetron sputtering

First principle molecular dynamics simulations of high temperature properties in transition metal nitrides

Simulating the slow structural evolution of materials using Accelerated Molecular Dynamics

Stabilization of cubic AlN in TiN/AlN and CrN/AlN bi-layer systems by combined FEM and ab initio analysis

Structural and elastic properties of polycrystalline Al_1-xCr_xN alloys : multiscale computations versus experiments

Theoretical spectroscopy investigation of hard TiN/SiNx interfaces

Elasticity in TiAlN alloys: the significant elastic anisotropy and the dependence on the SQS model

Improving thermal stability of hard coating films via a concept of multicomponent alloying.

Packing structure and optical properties of functionalized pentacene

In situ tribology of cold spray-deposited pure aluminum and Al-Al₂O₃ composite coatings

Thermal Spray Lubricious Oxide Coatings

High temperature abrasive systems

Customized Surface Technology for Innovative Automotive and Industrial Products

Ultra-fast Synthesis of Superhard Borides: A Paradigm Shift in Surface Engineering for Tooling and Automotive Applications

A study on tribological behavior of arc-coated Ti-Al-N films on AISI 4340 alloy steel for automotive application

Predicting lifetime of silver and gold coating depending on their thickness, stress and environmental conditions

Understanding durability of lubricant/DLC coating interface

From DLC to Si-DLC based layer systems with optimized properties for tribological applications

HIPIMS Discharge Dynamics: Evolution and Origin of Plasma Instabilities

Modes of operation in HiPIMS: Understand and optimize the discharge pulse

High-rate reactive deposition of multifunctional Ta-O-N films using high power impulse magnetron sputtering

Variation of high power pulsed / modulated pulsed power magnetron sputtering based on oscillatory voltage wave forms for the deposition of carbon and aluminum oxide coatings

The development and the application of a high power impulse inverted cylindrical magnetron sputtering system for the elaboration of nanomaterials on wires or fibers.

Low pressure High Power Impulse Magnetron Sputtering systems for deposition of biomedical functional thin films

Material properties of Aluminum Metal (Titanium/Chromium) Nitride coatings deposited by High Power Impulse Magnetron Sputtering (HIPIMS⁺) technology.

On the Influence of superimposed MF and HPPMS/HiPIMS pulsed packages on the deposition rate and properties of TiN

Angle-resolved energy flux measurements of a HIPIMS-powered rotating cylindrical magnetron in reactive and non-reactive atmosphere.

Ion treatment and duplex coatings by arc plasma immersion surface engineering processes.

Growth kinetics of electrochemical boriding of titanium

Improvement of Electrical Properties of Silicon Oxide Film with Ultraviolet and Organic Gas Assisted Annealings

Enhancement of gas barrier properties of polypropylene by surface treatment before DLC coating

Cathodic Arc Plasma Treatment for Surface Alloying and Modification

Evaluation of Electochemical Boriding of Inconel alloys

Electrochemical Boriding of Molybdenum

Mechanical and Microstructural Characterization of Nitrided AISI 4140 steel with Electroless NiP Coating