ICMCTF2019 Monday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Monday, May 20, 2019 | |||||||
|---|---|---|---|---|---|---|---|---|
| 10:00 AM | 11:00 AM | 12:00 PM | ||||||
| B1-1-MoM |
Structural, Optical and Wettability Properties of Thermally Evaporated CaF2, MgF2 and CaF2/MgF2 Films
|
Metal / ScAlN / Interdigital Transducer (IDT)/ LiNbO3 Multilayer Structure for High K2 Surface Acoustic Wave Device
|
Sputter Deposited W-HfO2 for Solar Absorbers
|
High Power Impulse Magnetron Sputtering using Deep Oscillatory Micro Pulses for Surface Engineering
|
||||
| B3-1-MoM |
On the Deposition and Properties of Carbon-based Multilayer Systems Prepared by PLD
|
Improved Adhesion of a-C and a-C:H Films with a CrC Interlayer on 16MnCr5 by HiPIMS-Pretreatment
|
Properties Of Diamond-Like Carbon Films With Incorporated CVD-Diamond Nanoparticles
|
Influence of the Argon as an Ignitor and an Agent on DLC Properties Growth at Pressure as Low as 3 x 10-4 mbar by Modified Pulsed-DC PECVD Method
|
||||
| D1-1-MoM |
Very Thin Gold Films Deposited on Collagen Fabric for Skin Cell Recover
|
Effect of Calf Serum on Tribological Behavior of DLC Coating in Ti-6Al-4V / Ti-6Al-4V Contact for Application to STEM / NECK Contact of Modular Hip Implant
|
Accelerated Tests for Lifetime Prediction of Interlayers and Interfaces of Coated Implants in Body Fluid
|
Thin Film Metallic Glass Coating as an Effective Antiadhesion Coating for Platelet and Cancer Cells
|
Improvement of Surface Properties of Nitinol Alloy through Deposition of Graphene by Electrophoretic Deposition Technique for Biomedical Applications
|
|||
| H2-1-MoM |
Acoustic Emission Measurements to Quantifying Damage Accumulation and Crack Initiation in Nickel Single Crystals during High Frequency In Situ Cyclic Loading Experiments
|
A Data-driven Approach to Describe Fatigue Damage Evolution and Crack Initiation in a BCC Steel Microstructure
|
Low and High Cycle Fatigue Testing of Ni Microbeams
|
Nanocrystalline Alloys with Disordered Complexions Probed by In Situ Mechanical Testing
|
Structural Evolution and Wear-rate Transitions in Nanocrystalline Alloys
|
Effects of Thermal Cycling on Nano-mechanical Properties of Thermal Barrier Coatings
|
||
| TS4-1-MoM |
2D Materials Based Epidermal and Implantable Conformable Bioelectronics
|
Performance Deterioration Characteristics of Silver-Nanoparticle-Printed Flexible Electric Wirings under Severe Bending Deformation
|
Characterizing the Mechanical Reliability of Flexible and Stretchable Conductive Inks on Polymeric Substrates
|
Printed Hybrid Materials for Flexible Electronic and Optoelectronic Devices
|
||||