The Deformation of the Substrate During Indentation into Superhard Coatings: The Bückle’s Rule Revised

Deformation Behavior in Al/a-Si Core-shell Nanostructures and Layered Thin-films

Nanocomposite Coatings with Enhanced Tribological and Corrosion Properties

Temperature Dependence of Thin Films Elastic Constants by In-situ Brillouin Light Scattering. Application to Binary Nitride Thin Films

Hardness Enhancement and Deformation Mechanisms in Self Organized Zr-Al-N Nanocomposites Containing Multilayered Structures

Processing of CrN/VN Nanolayered by Cathodic Arc Deposition: Lubricious High-temperature Oxide Formation

Tribological Behavior of Thin Hard Nanostructured Coatings under different Temperature Levels

Nanostructuring Transition Metal Nitride Coatings — Good and Bad for Metal Cutting Tools

Improving the Tribological and Corrosion Performance of a Magnesium Alloy by Depositing Novel Metallic Nanostructured PVD Coatings

Design and Properties of New Multifunctional Ceramic Coatings

Influence of Si Alloying and Al/Cr Ratio in AlCr Powder Metallurgical Targets on Coatings Deposited by Magnetron Sputtering

Platinum-based Nanocomposite Electrode Thin Films for High Temperature Operation

Biomimetic Approaches for Hard Coatings on Soft Substrates

Hard Nanocrystalline Conductive Materials MBCN (M = Ti, Zr, Hf) for Harsh Environments: Effect of the Choice of Metal Element

Innovative Architectured Sol-Gel Coatings for Wear and Corrosion Protection of Low-Carbon Steel

Some Aspects of Surface Treatment by Laser Melting

An Investigation of Material and Tribological Properties of MoS₂-Sb₂O₃-Au Solid Lubricant Films under Sliding and Rolling Contact in Different Environments

Efficiency Improvement in Automobile Power Train by Diamond-like Carbon Coatings under Elasto-hydrodynamic Lubrication

Deposition, Characterization, and Performance of Tribological Coatings on Spherical Rolling Elements

The Electrical Contact Resistance Endurance of Silver Platted Contacts Subjected Combined Fretting-reciprocating Slidings

Friction and Wear Mechanisms of Tungsten-carbon Systems: A Comparison of Dry and Lubricated Conditions

Tribological Performance of Diamond Like Carbon and Nitride Based Coatings against PTFE Based Composite Seal Materials in Oil Free Methane Environment

Investigation and Tribological Performance Assessment of Various Solid Lubricant Mixtures

Microstructure and Mechanical Properties of Ti-Si-N Composite Coatings Synthesized by Different Target Silicon Content

Analysis of Tribological Characteristics of Various Solid Lubricants at Different Sliding Conditions

Tailored Coatings for Demanding Environments

Influence of the Composition on the Properties of (Cr_1-x,Al_x)N/MoS_y PVD Coatings

High Density Oxygen Plasma Ashing of CVD-Diamond Coatings with Minimum Damage to WC (Co) Tool Substrates

Tribological Behaviour of Al-Si alloys with 6.5%, 12% and 18.5% Si during Machining using CVD Diamond and DLC Coated Tools

Wear Study of Structured Coated Belts in Advanced Abrasive Belt Finishing

Less is More... Future Demands in Coating Design for Machining Applications

Laser-induced Transfer of PVD Layers from a Carrier onto Various Product Surfaces as Decorative and Functional Coatings

Solid-solution Hardening of Martensitic Stainless Steels via Low Temperature Plasma Nitriding

Mechanical and Tribological Characterization of Duplex and Superduplex Stainless Steel Treated by Plasma Immersion Ion Implantation

Evaluation of TiN Diffusion Barrier Layers with different Microstructures by Transmission Electron Microscopy and Atom Probe Tomography

Mapping Deformation in Small-scale Testing using High Resolution Digital Image Correlation Methods

Towards Depth Profiling of Coating Properties: Stiffness, Hardness and Residual Stress

Influence of the Milling Geometry on the Relaxation Behavior of the H‑Bar Geometry used for Residual Stress Measurement with the FIB‑DIC Method

Residual Stress Evaluation in Multilayer Coatings Combining Grazing Incidence sin²( ψ) Method and Whole Powder Pattern Decomposition

Intrinsic Stress Evolution in Low-Mobility Metal Thin Films: New Insights on Defects Incorporation and Stabilization

Formation Mechanism of Pinholes in Electroplated Cu Films and Its Prevention

Material Optimization via Combinatorial Deposition and Analysis for Thermoelectric Thin Films

Abnormal Depletion of Cu Interconnects in Line-bump Solder Joints under Electron Current Stressing