ICMCTF2015 Monday Afternoon

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Monday, April 20, 2015
1:30 PM 2:30 PM 3:30 PM 4:30 PM
B2-2
The Initial Stages of sp2-BN Thin Film Growth by Chemical Vapor Deposition
Functionalization Of Aluminium Nitride Thin Films And Coatings
Oxidation Resistance and Mechanical Properties of Al-rich Nanolamellar Ti0.05Al0.95N Coatings Prepared by CVD
Wear Properties of CVD <001>Textured α - Al2O3 in Different Cutting Conditions in Stainless SteelL
Deposition of Diamond Coating on Fe-Based Substrates with Al and Al/AlN Interlayers
New Type of BN, AlBN Films Prepared by Synergetic Deposition Processes using Laser and Plasma: the Nanostructures, Properties and Growth Mechanisms
Low Temperature Plasma Deposited Silicon Oxycarbide Films using Organosilicon for Polycarbonate Glazing
B3
Influence of the Acetylene Precursor Dilution with Argon on the Microstructure, Mechanical and Tribological Properties of a-C:H Films Deposited by Modified Pulsed-DC PECVD Method
Investigation of Corrosion and Adhesion Property of Diamond-like-carbon andNitrogen Doped Diamond –Like- Carbon on Ti-6Al-4V
Diamond-like Amorphous Carbon Layer Deposited by Inductively Coupled Plasma System for Next Generation Dry Etching Hard Mask
Hardness, Wettability and Electrical Conductivity of Hydrogenated Carbon Coatings Deposited by a Plasma Beam Source
Development of Si-Containing DLC (DLC-Si) Coatings for Automobile Application
Sputtering-based Routes for High-rate Synthesis of Dense and Hard Amorphous Carbon Thin Films
Friction and Wear Performance of Multilayered a-C:H:Al Coatings
DLC Coatings with its Unique Properties and its use in Multiple Market Segments
Thick DLC Deposition by MF-AC PECVD Process
Site-selective Coating of Carbon Protective Layer on Sub-micron Trenches Using Plasma CVD
Effects of Normal and Shear Stresses in Rolling and Mixed Mode Contact on the Wear and Delamination of a WC/a-C:H Tribological Coating
C4-2
Surface Polarity Effects and New Hydrogen-related Complexes Observed in the High-resolution Luminescence from ZnO
Porous Silicon Buffer Layer Effect on ZnO Pyroelectricity
Electronic Band Structure Engineering of Highly Mismatched ZnO1-xTex Alloy Synthesized by Pulsed-Laser Deposition
Solar Selective Coatings for High Temperature Concentrating Solar Power: Design, Deposition and Ageing Behaviour Characterization
The Origin of In Solution-processable Bilayer Organometal Halide Hybrid Solar Cells
LiFePO4-xNy Thin Film Electrodes Coated on Carbon Fiber Modified Current Collectors for Pseudocapacitors
Structural and Photo-electric Properties of Cuprous Oxide (Cu2O) Thin Films Prepared by Ion-beam-assisted Deposition (IBAD)
E2-2
Electrical Resistance Response of Environmental Barrier Coated, Melt Infiltrated SiC/SiC CMCs Subjected to Tensile Loading Under High Heat-flux Thermal Gradient Conditions
Room Temperature Viscoplasticity of Nanocrystalline Nickel Thin Films
Orientation Dependent Mechanical Properties Of Metal-ceramic Nanolaminates
Time and Temperature Dependence of Viscoelastic Stress Relaxation in Al and Al Alloy Thin Films
Determination of Intrinsic Stresses in Coatings by Multi-axial Indentation
Microstructure-scale Measurements and Simulations of Surface Deformation in Columnar Tantalum Multicrystals
Measurement of Fracture Toughness in Thin Films by the Indentation Pillar Splitting Tests: Developments and Limitations
Interfacial Structure Effects on the Mechanical Behavior of Layered Nanocomposites
Numerical and Experimental Evaluation of Critical Variables for Multilayer Coatings Failure under Indentation Loads
Investigation on Plastic Behavior of HPPMS CrN, AlN and CrN/AlN-Multilayer Coatings using Finite Element Simulation and Nanoindentation
F1
Growth and Characterization of Heteroepitaxial III-N Semiconductor Films using Atomic Layer Epitaxy
Fast Rate and High Efficiency Cluster-assisted Epitaxy by Mesoplasma CVD
Synthesis and Characterization of Zeolite Y Coating on Mild Steel
Synthesis of Nanotwins in Low and High Stacking Fault Energy Materials
Novel Approaches to Plasma Processing of Carbon-based Nanomaterials
Prospects of the Physical Vapor Deposition Synthesis of 2D Materials
A Facile One-step Route of Synthesizing α-type MnO2/rGO Nanocomposites as Anode Materials for Lithium-ion Batteries
Photoelectric Properties of Orthorhombic and Zinc Blende Phase SnS Nanocrystals by a Facile Colloidal Synthesis Method
ZnO Nano-trees Active Layers as Heavy Hydrocarbon Sensors: from Material Synthesis to Electrical and Gas Sensing Properties
Hybrid Processing Method for Fabrication for Nanocomposite Nacre-Like Materials
The Electric Conductivity of Carbon Film with Top Surface Graphene Nanocrystallite Induced by Low Energy Electron Irradiation
TS4
The Method to Growth of Porous Graphene by Chemical Vapor Deposition and the Application of NO2 Gas Sensor and the Food Additives Molecules
Nucleation and Growth of Sputtered Two-Dimensional Transition Metal Dichacogenides
Phonon Transport in Graphene: Graphene Applications in Thermal Coatings
Orientation-Dependent Binding Energy of Graphene on the Pd(111) Surface
Characterization and Potential Gas Sorption Applications of Nanoporous Spongy Graphene Synthesized by Wet Chemical Reduction and Freeze Drying
Graphene Content-Sliding Speed Relation in the Ni-Graphene Nanocomposites Produced by Pulse Electrodeposition
Graphene as a Protective Coating and Superior Lubricant for Electrical Contacts
Three-Dimensional Textured Graphene Bioelectronics
Layer-by-Layer Thin Film Based on Reduced Graphene Oxide: A Surface Coating That Can Be Antiseptized within Minutes of Solar Exposure
TS5
Insights from Modeling of Pulse Power for Control of Deposition and Surface Modification
2D and 3D Modelling of HiPIMS Plasma and Transport
Direction and Sub-structures of Ionization Zones in DC Magnetron Sputtering
Plasma Analysis of Inductively Coupled Impulse Sputtering by Investigation of Cu, Ti and Ni Species
Investigation of Gaseous By-products of Interaction of In-liquid Plasmas with Al during Plasma Electrolytic Oxidation
Non-conventional Plasma and Sheath Diagnostics Related to Process Parameters
Plasma Plume Characterization in Pulsed Laser Deposition of Ultra-thin Boron Nitride Films
Transient Analysis and Modeling for Diagnostic of Pulsed Bipolar Plasma Electrolytic Oxidation Process
Investigation of Plasma Nitriding Process by Absorption Spectroscopy
Sessions | Time Periods | Topics | Schedule Overview