ICMCTF2001 Monday Afternoon

Corrosion Behavior of PVD Coated Tools for the Manufacture of Injection Moulding Polyvinyl Chloride (PVC) Components

Protective CVD Mullite Coatings for Corrosive Environments

Thermal Air Oxidation of Copper in an Applied Electric Field

Novel Coating Systems Produced by the Combined Cathodic Arc/ Unbalanced Magnetron Sputtering for Environmental Protection of Titanium Alloys and Titanium Aluminides

High Temperature Oxidation Behavior of HVOF-Sprayed Unreinforced and Reinforced Molybdenum Disilicide Powders

Corrosion Resistance and Microstructural Evaluation of Chromized Coating Process in Dual Phase Fe-Mn-Al-C Alloy

Steam Resistant Coatings for New Generation High Temperature Steam Turbines

PVD Al-Ti and Al-Mn Coatings for High Temperature Corrosion Protection of Sheet Steel

Growth and Characterization of Boron Carbide Nanostructured Coatings

The Role of Percolation for the Control of the Hardness in Super- and Ultrahard Nanocomposites

Multilayer Nitride Coatings by Closed Field Unbalanced Magnetron Sputter Ion Plating

Enhancement of Aluminum Oxide PVD with a Secondary Plasma

The Synthesis of Crystalline Alumina Thin Films at Low Temperature by Reactive Magnetron Sputtering

Role of Hydrogen Incorporation on the Structure and Mechanical Properties of Al_xO_yH_z Thin Films

Residual Stress Control of Magnetron Sputtered TiB₂ Coatings

Preparation of Amorphous SiC Films by Alternate Deposition of Si and C Thin Layers Using a Dual Magnetron Sputtering Source

Substrate Heating by Sputter-Deposition of AlN: The Effects of dc- and rf-Discharges for Nitrogen and Nitrogen-Argon Atmospheres

Improvement of the Corrosion Resistance of Hard Wear Resistant Coatings by Intermediate Plasma Etching and/or Multilayered Structure

Gas-Phase Chemistry in the On-Line Deposition of Coatings on Float Glass

Characterization of Nanostructured Hydrogenated Silicon Nitride Thin Films Produced by Plasma Modulated Chemical Vapour Deposition

Optical Properties of Thin Films Produced by High Density Plasma Enhanced Chemical Vapor Deposition ¹

Innovative and Cost-effective Synthesis of Indium Doped Tin Oxide Films Using ESAVD Method

The Influence of Film Composition on the Optical and Thermal Properties of Solar Control Coatings

Haze Reduction in Solar Control Coated Glass

Optical Coatings Deposited from an Ultrasonically Generated Aerosol

Ultra-Thin Carbon Films for Hard Disk Drive Applications

Metal-Containing Amorphous Carbon Films for Hydrophobic Applications

On the Preparation of Silicon Carbonitride Compounds

Influence of Chemical Sputtering on the Bonding Structure of Carbon Nitride Films

Bonding Structure in Amorphous Carbon Nitride : NMR, EELS, XANES and XPS Study

Growth, Structure, and Deformation Mechanisms of Fullerene-Like CN_x Thin Films Synthesized by DC Magnetron Sputtering

On the Structure and Mechanical Properties of Ar Assisted Carbon Nitride Films

Thermal Stability of CN_x Thin Films

On the Conditions for cBN-Growth by Magnetron Sputter Deposition

LIGA Microtechnology and the Need for Coatings

Hydrogenated DLC and CN_x Based Multi-layer Films for LIGA Micromachines: Synthesis and Tribological Behavior

Properties of Thick Sputtered Ta used for Protective Gun Tube Coatings

Tungsten Carbide and Co-Base Alloy Coatings for Replacement of Chromium Plating

Galling Prevention in Extreme Environments with Engineered Surfaces

Oxidation Behavior of Cr-Al-N and CrN/AlN Films Synthesized by Cathodic Arc Plasma Deposition

Nanocomposite Coatings Made of YSZ Nano-Crystals in a Gold Matrix

Tribology of Tool-chip Interface and Tool Wear Mechanisms

In-Situ Observation of Pd Silicide Islands on Si Using UHV-TEM/STM

Characterization of Ge-Sb-Te Thin Films Deposited Using A Composition-Spread Approach

Deposition of Thin Bioceramic Film on Biomedical Implant.

Determination of the 3D-Distribution of Trace Elements in Coatings by SIMS

Microstructure and Mechanical Properties of Nanocomposite (Ti,Si,Al)N Coatings

Microstructure of Surface and Interfaces of TiAlN/Mo Multilayers

Microstructural Characterization of Aluminum Nitride Thin Films on Si(111) and (100) Substrates Grown by Plasma Assisted Molecular Beam Epitaxy

Characterization of Metal Oxide/Polymer Films.

The Application of X-ray Slitless Collimator for a Structure Study of Thin Film Coating

Recent Developments in Inverted Cylindrical Magnetron Sputtering

Construction of High Efficiency Microwave Atmospheric Pressure Plasma for Various Surface Treatment Processes

Pulse DC Power Hollow Cathode

Hollow Cathode PVD of Nitride and Oxide Films at Low Substrate Temperatures

Atomic Emission Spectroscopy of a Hollow Cathode Discharge Used for Deposition Applications

Characteristics of He/O2 Atmospheric Pressure Glow Discharge and Its Dry Etching Properties of Organic Materials

Investigation of Microparticles Emission from Plasma of Gas Discharge with Hollow Cathode

Real-Time Thermal Conductivity and Delamination Mechanisms of Plasma-Sprayed Thermal Barrier Coatings under High-Heat-Flux Conditions

Microstructural Characterization Studies to Relate the Properties of Thermal Spray Coatings to Feedstock and Spray Conditions

Electrical Properties of Pressure Quenched Silicon Prepared by Thermal Spraying

Part I: Characterization of Cr₃C₂-25% NiCr Plasma Sprayed Coatings Produced at Different Pressures

Part II: Tribological Performance of Cr₃C₂-25% NiCr Plasma Sprayed Coatings at Different Pressures

The Effect of Humidity on the Sliding Wear of Plasma Transfer Wire Arc Thermal Sparayed Low Carbon Steel Coatings

Indentation Testing of HVOF Sprayed WC-Co

Thermal Spray Coatings for Molten Carbonate Fuel Cells Separator Plates