ICMCTF2007 Thursday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Thursday, April 26, 2007 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | ||||||||
| A3-3 |
Luminescence Sensing of Temperatures in Thermal Barrier Coatings
|
Studies of TBC Ageing by Photothermal Techniques
|
Durable APS Sensor Coatings for Remote High Temperature Detection
|
Sensor TBCs: Remote Condition Monitoring of EB-PVD Coatings Utilising Laser Induced Phosphorescence (LIP)
|
Effect of Excitation Energy on Luminescence Decays in Rare-Earth Doped High Temperature Oxides
|
Hyperspectral Imaging of Residual Stress Distributions In Thermally Grown Oxides
|
High-Temperature Vibration Damping Characteristics of Thermal Barrier Coating Systems
|
Relationships Between Microstructural Features and Optical Properties of Yttria-Stabilized Zirconia Plasma-Sprayed Coatings
|
|||
| B3 |
Enhancement of Coating Adhesion by WC Single-Phase Interfacial Layer for Cemented Carbide Based Coated Cutting Insert
|
Influence of Growth Texture on the Wear Properties of CVD α-Al2O3 Coatings
|
Chemical Vapor Deposition of Thin Films and Coatings: Evaluation and Process Modeling
|
Deposition of Metastable (Ti,Al)N Coatings by Thermal CVD
|
Microstructural Investigation of MTCVD (Ti(C,N) Coatings
|
Effects of Deposition Temperatures on the Properties of Hermetically Carbon-Coated Optical Fibers Prepared by Thermal Chemical Vapor Deposition Method
|
|||||
| B6-1 |
The Origin of Superhardness in nc-TiN/a-Si3N4 Nanocomposites
|
Metastable Phase Selection and Spinodal Decomposition in Ti1-xSixNy System Studied by ab Initio Thermodynamic Modeling: A Comparison with the TiN/CrN-AlN System
|
Ti-Si-C Thin Films Deposited by Magnetron Sputtering from a Ti3SiC2 Target
|
Room Temperature Deposition and Characterization of Hard Ti(X)N (X= Y, Si) Nanostructured Composite Films
|
Characterisation of Hard Ti-Si-B Coatings Deposited by Pulsed Unbalanced Magnetron Sputtering
|
Improvement of the Cutting Performance of TiSiN Coated Cemented Carbide-Tools
|
Mechanical Property and Cutting Test of Multilayer Coating System with Si Containing Layers
|
Comparative Study of Nanocomposite Ti-B-C, Ti-B-C-N, and Ti-B-C-N-Si Films Deposited by Unbalanced Magnetron Sputtering
|
Hard Tribological Ti-(Al,Cr,Si)-(B,N) Films with Enhanced Thermal Stability, Corrosion- and Oxidation-Resistance
|
||
| D2-2 |
Laser Micro and Nanoprocessing of Diamond and Diamond-Like Carbon Films
|
Comparative Studies of Influence of Acetylene to Argon Flow Rate Ratios on Amorphous Carbon Films Produced on Steel Substrates by Plasma Immersion Ion Implantation and Deposition
|
Successful CVD Diamond Integration with GaN for High Power Electronics Applications
|
The Electrical Properties of Amorphous Carbon at High Electric Field Using the Sandwich and Coplanar Structure
|
Structure, Electronic Characterisation and Applications of Nanostructured Carbon Thin Films
|
Anti-Inflammatory, Antiallergic and Anticancerogenic Properties of NCD
|
Low-Friction Diamond-Like-Carbon (DLC)-Layers for Humid Environments
|
Deformation Behaviour of DLC Coatings on (111) Silicon Substrates
|
Effect of Residual Stress in P Doped Microcrystalline Silicon Carbide (mc-SiC) Films Grown by Hot-Wire Chemical Vapor Deposition (HWCVD)
|
||
| E2-3 |
Exploiting Quantitative In-Situ Nanoindentation to Investigate the Mechanisms of Plastic Deformation in Thin Films
|
Recent Advances in Nanomechanical/Nanotribological Testing of Ultra-Thin Films for Stiction Control in MEMS Devices
|
True Hardness Measurement by Nanoindentation using a Single Sharp Indenter
|
Atomic Force Microscope Investigation on Static Versus Dynamic Nanotribological Evaluation of Metal-ZrN and ZrN Thin Films
|
Limits of Measurement and Analysing Techniques for the Determination of Mechanical Coating Parameters - a) classical indentation and b) indenters of the next generation
|
FEM Simulation of the Effect of Surface Roughness on Nanoindentation of Thin Films With a Spherical Indenter
|
On the Problem of Properly Designed FE-Models for Mechanical Contact Problems on Layered Materials
|
Understanding Automotive Coatings Behaviour using Nanoindentation
|
Deviations in Determining Coatings' and Other Materials' Mechanical Properties, when Considering Different Indenter Tip Geometries and Calibration Procedures
|
||
| G4/E4 |
TiAlCN/VCN Nanoscale Multilayer PVD Coatings Deposited by the Combined High Power Impulse Magnetron Sputtering / Unbalanced Magnetron Sputtering, (HIPIMS/UBM) Technology Dedicated to Machining of Al and Ti Alloys
|
A Review of the Developments in PVD Coatings for Machining High Temperature Alloys
|
Application of Nano Multilayered PVD Coatings
|
Tribological Properties Investigation on Coated and Thermal Treated Surface used for Dry Machining
|
Tribological and Wetting Behaviour of a Nanolaminated PVD Tool Coating with a Nanostructured Top Layer in Interaction with a Biodegradable Lubricant for Green Metal Forming
|
Development of Nano-Columnar Carbon Coating for Dry Micro-Forming
|
Mechanical Properties and Tool Performance of Si Doped TiAlN Coatings Deposited by Arc Ion Plating
|
Development of Nano-Textured Self-Lubricating Adaptive Films
|
Microstructure and Vacuum Sliding Behaviour of Thermally Oxidized Ti-6Al-4V Alloy
|
||
| H2 |
Influencing Parameters for Thin Film Deposition in High-Power Impulse Magnetron Sputtering Processes
|
Efficiency of High-Power Pulsed Magnetron Sputtering
|
Modulated Pulse Power Technology for Protective and Tribological Coatings
|
CrN/NbN Nanoscale Multilayer Coatings with Enhanced Corrosion Resistance Achieved by HIPIMS Interface Pre-treatment
|
Growth of ZrO2 Films by High Power Pulsed Magnetron Sputtering
|
HIPIMS Plasma Impedance Characterization
|
New Process Latitude in the Plasma Technology by HIPIMS/HPPMS using High Peak Pulse Power Supply in Unipolar, Bipolar, and DC with Additional Pulse-Combined Mode
|
||||