ICMCTF2018 Wednesday Morning

Sessions | Time Periods | Topics | Schedule Overview

Hover over a paper or session to view details. Click a Session in the first column to view session papers.
Session Wednesday, April 25, 2018
8:00 AM 9:00 AM 10:00 AM 11:00 AM
A2
Corrosion Degradation of High Temperature Coatings: Similarities and Differences for Marine and Aero-Turbine Applications
Evolution of Microstructures and Interfaces in Doped, Layered, and Composite Coatings Exposed to Sand Laden Flows in a Gas Turbine Engine
The Effect of HVOF Bond Coating with APS Flash Coating on TBC Performance
Influence of Process Conditions and Ceramic Doping on the Performances of Advanced TBCs Based on Al Slurry
Synthesis and Characterization of Combined Oxides and Ni Superalloy Coatings by Cathodic Arc Evaporation for Bond Coat Application
Steam Oxidation Behavior of Yb2Si2O7-Based Environmental Barrier Coatings
The Fatigue Behavior of TiCrAlTaSiN Coated and Uncoated Titanium Alloys
Crack Propagation Behavior of Thermal Barrier Coatings with Cyclic Thermal Fatigue Tests
B1-3
High Quality Oxide Films Deposited at Room Temperature by Ion Beam Sputtering
van der Waals Oxide Heteroepitaxy
Color Controllable TiOxNy Coatings Deposited by Magnetron Sputtering
SiO2/Sc0.31Al0.69N/LiNbO3 Multilayer Structure for SAW Device Applications
Self-lubricant CrO-Ag Coatings for Machining Tools
B6
Ab Initio Inspired Design of Ternary Boride Thin Films
Enthalpy/Entropy-driven Segregation of Solute Elements of Cu Alloy Films to Self-form < 2 nm Unitary V to Quinary V-Nb-Mo-Ta-W Diffusion Barrier Layers
Mechanical Properties of V0.5Mo0.5N1-xOx Thin Films
Hard Transparent Coatings in the Al-Si-O-N System
Exploitation of Surface Modification and Architecture Control for Multi-Functional Coatings via Nano-Composite, Multilayer, Hybrid Organic/Inorganic and Bio-Inspired Approach
The Effect of Hybrid PVD Process on the Mechanical and Antistatic Properties of TiO2 Based Nanocomposite Thin Film
Optical, Electrical and Structural Characteristics of Mg-doped CuCrO2 Transparent Conductive Thin Films
Brittle Film-induced Cracking of Ductile Substrates
Ultra-high Vacuum dc Magnetron Sputter-deposition and Microstructural Characterization of Zr and ZrCx Thin Films
C3
Synthesis and Optical Characterization of Cds Thin Film Obtained by Colloidal Technique
Electrochemical Characteristics of NixN Thin Films Deposited by DC and HiPIMS Reactive Magnetron Sputtering
Photovoltaic Properties of Cu2O-based Heterojunction Solar Cells using n-type Oxide Thin Films Prepared by Magnetron Sputtering System with Loading Chamber
Synthesis of Tungsten Bronze by a Solution-based Chemical Route and the Near-Infrared Shielding Properties of Tungsten Bronze Thin Films
ZnO Nano-structures Growth and Investigation
Nitrogen Doping of ZnO Films by Decomposition of NO Gas using Heated Ir Wire in Catalytic Reaction-assisted CVD
Morphology-Controlled Growth of ZnO Nanorods by Chemical Bath Deposition and Seed Layer Dependence on Their Structural and Optical Properties
Piezoelectric Coefficient and Morphology Investigation of the Wurtzite Ga-doped MgZnO Thin Films via RF Magnetron Sputtering
Growth of Al1-xScxN Thin Films for Pyroelectric and Piezoelectric Applications
A Simple Non-toxic Simultaneous Selenization/Sulfurization Process for the Cu(In,Ga)(S,Se)2 Thin Film Solar Cells
Thin Films for Transparent Thermoelectric Modules
E1-3
A Study on the Tribological Behavior of the AISI 316L Steel Exposed to Boriding to Reduce its Friction Coefficient and Enhance its Wear Resistance
Immersion Time-affected Tribocorrosion Behavior of Cr/GLC Multilayer Coating in Artificial Seawater
A Comparison of the Galling Wear Behaviour of PVD Cr and Electroplated Hard Cr Thin Films
Microstructural Evolution of Cold-sprayed Copper Coating during Reciprocating Sliding Wear
Scratch Adhesion Resistance of Nickel Boride Layers on Inconel 718 Superalloy
Comparison of Surface Treatments for Adhesive Force Measurements Between Magnetron Sputtered TiW Thin Films and Alumina Substrates
Influence Of Microstructure on Wear of Boroaluminized-Hot-Work Tool Steels
F4-1
Self-healing Thermal Barrier Coating System for Prolonged Lifetime
TiO2 Thin Films Deposited onto PET by High Power Impulse Magnetron Sputtering for Photocatalytic Degradation of Carbendazim
Thermal Stability of Structure and Enhanced Properties of Zr-Ta-O Films with Low and High Ta Content
Electrophysical Properties of Nanoparticle-Added PEO Coatings on Aluminium
Titania Films Deposited by Constant Current High Power Impulse Magnetron Sputtering
On the Importance of the Energy of Negative Ions in Achieving Uniform and High-quality Magnetron Sputtered AZO Films
Combinatorial Thin Film Materials Science: Limitations and Opportunities for Combining Experiments and DFT Based Theory
G1
Enhanced PVD Process Control by Online Substrate Temperature Measurement
A Compact, Symmetrical and Efficient Filtered Cathodic Arc Source that uses Permanent Magnets
HiPIMS Meets Diamond
Functional DLC by HiPIMS and Pulsed DC-magnetron Sputtering in an Industrial Coating System
Microwave Assisted PVD and PECVD Systems for Carbon-Based Nano Composites
Correlation Between Plasma Nitriding of Several Steels and Active Nitrogen Concentration Correlated through Optical Emission Spectroscopy and Atomic Nitrogen Partial Pressure
CVD Technology & Machinery – Tribological Applications and High Temperature Potential
Vacuum Barrel Coating: An Opportunity to Performance Increase for Various Small Parts
Scaling Up Graphene-like Carbon Film: Insights into the Deposition Process in a Roll-to-roll rf Plasma CVD System
TAOS Based Cu/TiW/IGZO/Al2O3/Pt Bilayer CBRAM for Low-power Display Technology
Sessions | Time Periods | Topics | Schedule Overview